How to Apply : 9H DIY CFC Ceramic

HOW TO APPLY 9H DIY CFC CERAMIC
Product Usage Instructions:
Compatible with:
-
CFC: G Coat
-
CFC: Ceramic King
-
CFC: Aqua Pro
-
CFC: Aqua Plus
Temperature:
For optimal results, apply Ceramic King within the temperature range of 5°C - 35°C, with the ideal temperature range being 16°C - 24°C.
Features:
A patented fast-drying technology that makes it weatherproof within 2 hours. It can be applied outdoors, but avoid direct sunlight, windy or dusty condition.
Preparation:
To prepare your vehicle for application, first wash it with a pH-neutral Car Shampoo and avoid using shampoos or detergents with wax or conditioner.
For best results:
Decontaminate and polish your vehicle's painted surface to ensure a clean surface for the Ceramic coating to bond well.
Use an alcohol-based cleaner like IPA solution to remove any polishes, waxes, lubricants, oils, chemicals, or microscopic particles.
Dry your vehicle using a blower or a soft microfiber cloth.
Application:
Apply 5-8 drops of ceramic coating to a microfiber cloth or applicator block and apply it evenly to a 40-60cm square area of your vehicle's panel in a firm, crisscross, and overlapping motion.
Allow it to sit for 2-5 minutes, but avoid leaving it too long, especially in hot temperatures, until the coating evaporates or the surface smears. This process is known as "flashing." Use a damp microfiber cloth or mist a little water on the panel, then wipe the area until dry. Repeat the process until the entire car is covered.
Let your vehicle sit for at least 2 hours before enjoying its new look and smooth surface.
Suitable for
- All painted surfaces with clear coats,
- plastic,
- stainless steel,
- aluminum,
- chrome, and
- exterior decals for automotive and marine
Volume: 30ml or 50ml
Caution: Keep out of reach of children. Avoid contact with eyes. If contact occurs, rinse thoroughly with a large amount of water. Do not consume. If swallowed, do not induce vomiting. Drink a large glass of water and seek medical attention.